UKB 625

We have developed both UKB models that are self-propelled, and versions that can be mounted on tool carriers or other types of machines.

  • High-temperature hot air system with TURBO fan
  • Manual forward operation
  • Up to 3,250 m² per hour
  • Low gas consumption per m²
  • Reduced fire risk (combustion in a separate heat cannon)
  • Burner system with DG3503 gas approval
  • Petrol engine

The machine is used for blanching weeds on paved surfaces, including asphalt, concrete, gravel, and other types of heat-resistant surfaces.

Areas of application:

  • Cobblestone paving
  • Gravel
  • Sidewalks
  • Parking areas
  • Curbstones
  • Cemeteries
  • Parks

Along curbstones, on sidewalks, paths, cycle paths, pedestrian areas, traffic islands, and around signs.

ZACHO High-temperature hot air system:

  • No chemicals or toxins
  • Reduced fire risk

Fast and efficient heat transfer. Angled positioning for effective curb treatment.

UKB 625 is based on a high-temperature hot air system. Air is drawn in through the blower housing mounted on the engine and guided via a hose to the cannon’s combustion chamber, where the ignited gas is mixed with a large volume of air. This ensures very high combustion efficiency.

Since the combustion chamber is located in the upper part of the cannon, only the heated air is blown down into the heat shield. Due to the large air volume, the hot air is forced forward in front of the machine, heating the surface ahead. This preheating ensures a high and efficient working speed, as the weeds are “blanched” within seconds.

  • The cannon design eliminates the risk of burns by touch or fire during operation
  • Highly effective around signs, lampposts, benches, etc., due to the hot air fan in front of the machine
  • Safe and simple operation with a “Quick on/off function”

Automatic gas shut-off when stopping. No flammable gas/air mixture outside the equipment due to the air-based system with a large excess of air.
With the quick on/off function, the equipment is particularly suitable for “interval treatment,” significantly reducing gas consumption.

Vibrations: Maximum 2.5 m/s²

Noise: The A-weighted sound pressure level is measured at 88 dB(A), measured at a height of 1.7 m and at the operator’s position during normal use of the machine. Hearing protection is therefore required when staying in close proximity to the machine.

Contact us

Tekniske data

Working width: 650 mm
Performance: up to 4000 m2 / hour
Gas: 1 x 11 kg
Nominal gas consumption: 10-20 kg / Ha
Blower capacity: 800-1000 m3 / hour
Gas approval: DG3503
Weight: 90 kg
Width: 650 mm
Length: 1750 mm
Height: 1000 mm

Motor

Type, Subaru gas engine
Power 6 HP
Speed max 3600 rpm
Start method Recoil (manual)
Ignition system Electronic
Fuel Gasoline
Engine oil 0.7 ltr. (SAE 30)
Tank capacity 3.6 Ltr.